Avolites Pearl Expert Titan, Operator'S Manual

Page: 136 / 149

Page 136 – 15 . Changes in version 2.0
PearlExpertTitan_Man_v2-0.doc 23/09/2009 12:16:00
Next and Previous Cue in Edit Times and Playback Options: In
Playback Options and Edit Times when a Cue List is selected you can
now use the Next [->] and Previous [<-] Cue buttons as well as the
wheel to select the cues in the list.
Swap handles when moving: There is a new option in the Move
Menu ([Avo] + [Photo Copy]) to swap any conflicting target handles.
This means that any handles in the way at the destination of the move
will be moved to the positions of the source handles. This makes it
easier to rearrange handles when the page is nearly full.
15.4 Changes in v2.0
Prevented multiple instances of Visualiser: Having multiple copies
of Visualiser running could cause confusion as to which copy you should
be using. The software has been changed to prevent you opening
multiple copies. If you try and open a second instance it will simply
front the already running copy.
Cue list link from previous cue was mis-named: In edit times for a
cue list step the "Link from Previous Cue" was miss named as "Link to
next Step".
Highlight always highlights selection: Fixtures are now highlighted
if in the selection and highlight is enabled. Before they would only
highlight if the selection was in solo mode.
Delay out in edit times: The delay out time in edit times now
explicitly says it is the same as the Delay In time instead of "None"
15.5 Bugs fixed in v2.0
Sometimes keyboard does not work in Windows: Occasionally the
keyboard would not work in Windows because the panel was still
expecting you to type something. This has been fixed so the panel
releases the keyboard to Windows when the keyboard is not required.
The Esc key can also be used to release the keyboard to Windows.
Unable to snap back past a linked cue: If you had a cue list which
contained a linked cue and you tried to snap back through the steps it
would snap back until you reached the linked cue and then remain on
that cue.
Fixture overlap did not work on Mode 1 or 2 when fade time was
0s: If the fade time of a cue was 0s and you applied overlap in Mode 1
or 2 then the overlap would have no effect.
Wheel display not updated when changing Intensity in channel
menu: When changing intensity values in channel menu the wheel
display was not always updated to reflect the new levels.
Shapes not fading out: If a cue had a fade time and you killed the
playback the shape would snap out and not fade gracefully.
Save show suggests “Autosave” as a name: The save show
function would suggest "Autosave" or "Shutdown" as a show name
when saving a show. It now suggests the name of the currently loaded
show or is blank if the show has not been saved.