Avolites Pearl Expert Titan, Operator'S Manual

Page: 64 / 149

Page 64 – 6 . Cues
PearlExpertTitan_Man_v2-0.doc 23/09/2009 12:16:00
The times are set like this:
1> Press A [Edit Times] at the top level menu.
2> Press the Swop button of the cue.
3> Press E [Fade Mode x] to set the cue mode. This sets how the
times are used, see below.
4> Press A [Delay time] to set the delay before the cue starts, B
[Fade time] to set the fade-in time of the cue, and C [Fade out
time] to set the fade-out time of the cue.
5> Type the new time (in seconds) using the numeric keypad and
press Enter to save it.
6> Press D [Fixture Overlap] to change the overlap, then enter 0-100
on the keypad. 100% means all fixtures fade together. 0% means
that the first fixture will finish its fade before the next one starts.
50% means that the 2
nd
fixture will start fading when the first one
is half way through its fade. The order of the fixtures is set by the
order you selected them (but you can change this, see section
6.7.2).
7> Press Exit to get out of Edit Times mode.
• You can also set independent times for the IPCGBES attribute