AVL AVL DiCom 4000, Service Manual

Page: 144 / 182

Opacity Measuring Chamber Type A AVL 4000
6-20 Service Manual
Seal ring YM2721 is glued on with silicon.
•
Before replacing the protecting glass, first remove the seal ring.
•
Then undo the 2 countersunk screws concealed beneath the seal ring.
•
The entire light unit can now be pulled out from the rear.
•
You can then press the protecting glass off the spacing ring (glued with silicon
adhesive).
•
Clean any remains of silicon adhesive from the spacing ring.
•
Replace the light unit in the cover plate.
•
Bond the protecting glass to the spacing ring from the outside.
•
Bond the seal ring back into place with silicon adhesive.
Connecting the lines:
•
Connect the two plastic plugs to the lamp socket.
•
Connect the two metal plugs to the connections on the lamp head.
Make sure that no adhesive gets onto the glass or smears it.