
Cleaning and maintenance guidelines
Cleaning the system
The surface materials of the CA310 are durable and easy to
maintain� Follow the general cleaning guidelines, found to
the right�
Maintaining the system
The CA310 is designed with minimal maintenance require-
ments� However, a yearly check on system fasteners and
cables (screws, nuts, bolts, cables) will ensure that the
CA310 is in good operating order�
NOTE
Avizia will make available, on request, such
circuit diagrams, component part lists, descrip-
tions, calibration instructions or other informa-
tion which will assist appropriately qualified
technical personnel to repair those parts of the
equipment which are classified by Avizia as field
repairable�
LCD monitor and Camera
• Always disconnect your monitor’s power from the
system before cleaning� Clean the camera and LCD
monitor surface with a lint-free, non-abrasive cloth�
Avoid using any liquid, aerosol or glass cleaners�
• Slots and openings on the back or top of the cabi-
net are for ventilation� They must not be blocked or
covered� Your monitor should never be placed near or
over a radiator or heat source, or in a built-in installa-
tion unless proper ventilation is provided�
• Never push objects or spill liquid of any kind into this
product�
System
• All surfaces — painted and plastic cart components —
will withstand cleaning by commonly available multi-
purpose surface cleaners�
• To avoid risk of electric shock, do not expose electri-
cal components to water, cleaning solutions or other
potentially corrosive liquids or substances�
• Do not immerse system or system components in
liquid or allow liquids to flow into the cart� Wipe all
cleaners off surface immediately using a damp cloth�
Thoroughly dry surface after cleaning�
• Do not use flammable cleaners on cart surfaces due to
close proximity of electrical power and equipment�
• Never use steel wool or other abrasive materials that
will damage the surface finish�
• Do not use strong solvents such as trichloroethylene
and acetone� These solvents will damage the surface
finish�
• It is recommended that any cleaning solution be
tested on a small, inconspicuous area to ensure sur-
face is not harmed�
© 2017 Avizia Inc. All rights reserved. | avizia.com | AVZ-270920-A
CA310 | Installation & User Guide
Cleaning and maintenance guidelines
38
| Maintaining the system