manualshive.com logo in svg

Avizia CA310, User'S Installation Manual

Share
Download
Avizia CA310 User'S Installation Manual Download Page 31

Controlling volume and microphone

The system microphone is located on the front of the 

display and is extremely sensitive� Do not block or cover 

the microphone�

The system automatically manages echo cancellation�

The system speakers are located at the bottom of the 

system console� This is to ensure that the console is pro-

tected from foreign objects, dust, or liquids�

Adjusting the speaker volume

To adjust the volume, use the VOLUME CONTROL buttons 

on the console�

Turning microphone on and 

off

To mute your microphone, press 

 

  (Mute)

 to prevent 

remote participants from hearing you�  Press again to 

toggle the mic back on�

NOTE

Pressing  

  (Mute) shuts off the internal (local) 

microphone only; all connected audio sources, 
such as a digital stethoscope or laptop audio, will 
continue to be heard during a call�

© 2017 Avizia Inc.  All rights reserved.  |  avizia.com  |  AVZ-270920-A

CA310  |  Installation & User Guide

Controlling volume and microphone

31

Integrated speakers

|  Using the system

Mute

(microphone, local)

Integrated (local) 

microphone

Volume 

control

Summary of Contents for CA310















































Reviews:

No comments

Brands by name

Popular brands

Load more brands