Adjusting the system height
The CA310 can be height-adjusted using the HEIGHT AD-
JUST ARM at the right-side of the work surface�
Raising the work surface
Lift the height-adjust arm while raising the work surface to
the desired height�
Lowering the work surface
Lift the height-adjust arm and firmly lower the surface to
the desired height�
Lower before transporting
For your safety and to protect the CA310, fully
lower the work surface before transporting the
system� Pushing or pulling the system with any
part of the system other than its handle may
result in damage to the system�
Traversing thresholds and obstacles on the
ground
Use the handle to PULL the system safely
across thresholds, cords, cables, and other
potential obstacles on the ground� Always fully
lower the work surface before transporting the
system�
© 2017 Avizia Inc. All rights reserved. | avizia.com | AVZ-270920-A
CA310 | Installation & User Guide
Adjusting the system height
28
| Using the system
34�5” (88 cm)
43�75” (111 cm)
60” (152 cm)
70” (178 cm)
