manualshive.com logo in svg

Avizia CA310, User'S Installation Manual

Share
Download
Avizia CA310 User'S Installation Manual Download Page 25

Single-Client mode

Single-Client Mode (default) is a one-to-one setup and 
will send network to one and only one device� The prima-
ry Bridge Port [   ] will provide network to the system’s 
SX20 codec� 

Setting up Bridge Port 2  [   ] will send network to the 
PC Cabinet (option) if available� If Fleet Monitoring is 
enabled, then network is routed to the Fleet Monitoring 
processor within the Network Module�

Multi-Client mode

Multi-Client mode is a one-to-many setup�  Utilizing 
the Wi-Fi bridge connected to Bridge 1  [   ] will send 
network to all devices connected to the cart: SX20 co-
dec, laptop (via Console), PC (via PC Cabinet), and Fleet 
Service if enabled and subscribed�

NOTE

The network mode of Bridge 1 must match the 
setting of the Network Module� If Bridge 1 is in 
Single-Client Mode, then the Network Module 
must be in Single-Client Mode� If Bridge 1 is in 
Multi-Client Mode, then the Network Module 
must be set to Multi-Client Mode

NOTE

Multi-Client mode may required changes to the 
wireless network infrastructure�

Connecting to network

Connect to a wireless network

The CA310 Network Module can support wired or wireless 
network connections� It can host up to two external Wi-Fi 
bridges� The recommended wireless bridge is the Silex 
SX-BR4600WAN2 or end-user preferred, such as the Cisco 
Aironet Access Point set for Work Group Bridge�

The Silex SX-BR4600WAN2 can be powered from the two 
USB ports next to the bridge Ethernet ports of the Network 
Module and can be configured for Single-Client mode 
(default) or Multi-Client mode� The Silex SX-BR4600WAN2 
bridges slide into the mounting bracket attached to the 
top left and right sides of the cart’s column� 

NOTE

The Wi-Fi Bridge port on the Network Module will 
be disabled if it detects an active network connec-
tion via Ethernet� Remove the Ethernet cable to 
enable the Wi-Fi radio�

The Network Module will automatically switch 
between wired and wireless, but wired has prior-
ity� When a wired network is connected this will 
bypass the Wi-Fi Bridge ports and send network to 
all devices: SX20 codec, laptop (via Console), PC 
(via PC Cabinet), and Fleet Service if subscribed 
and enabled�

If a wireless connection is preferred, then the cart 
wired connection must be disconnected from the 
wired infrastructure�

Press and hold the CAM CTRL + AUX buttons for 3 seconds to 

confirm which MODE the Network Module is currently set to�

Press and hold the CALL + AUX buttons for 5 seconds to 

toggle the Network Module setting between the default 

Single-Client Mode and Multi-Client Mode� NOTE: The Wi-Fi 

Bridge 1 and Network Module modes must match�

Press and hold the CALL + CALL CTRL buttons for 5 

seconds to toggle between Enabling and Disabling 

the Fleet Monitoring Processor� 

© 2017 Avizia Inc.  All rights reserved.  |  avizia.com  |  AVZ-270920-A

CA310  |  Installation & User Guide

Connecting to network

25

|  Getting started

Summary of Contents for CA310















































Reviews:

No comments

Brands by name

Popular brands

Load more brands