Avid Technology Isis 7000, Setup Manual

Page: 18 / 223

New System Director and Engine Installation
18
Avid ISIS New Installation
Complete To be done

Determine Network Address Scheme

Configure SD IP Addresses, see “IP Addressing Overview” on page 80 .
• ISIS Left
• ISIS Right
• Management Port

In the 64-bit System Director, you need to change your default Internet Explorer 7
Security and Advance tab settings:
Click Tools > Internet Options and change the Security to the following:
• Internet - Medium
• Trusted - Low
Click the Advanced tab and change the following:
• Phishing Filter - Disabled
• Use SSL 2.0 - Enabled (checked)
• Use TLS 1.0 - Disabled (unchecked)

Install System Director and Installers, see “Software Installation” on page 84 .

Create File Systems, see the Avid ISIS Administration Guide.
• Open System Director Control Panel
• Click “Stop System Director”
• Click “Configuration File System”
• Click “Create Active File System”

Configure the first Engine (IP Addresses), see the Avid ISIS Administration Guide.
• Start ISS Agent via Management port
• Under System > Basic set IP Address

Connect the System Director to Engine number1, see “Connecting ISIS Hardware”
on page 67 .

Add Additional engine, see “Adding an Engine” on page 184 .

Upgrade ISB and ISS, see “Installing Software on the Engines” on page 93 .