Avid Interplay Authentication
103
3. In the text box, type the actual server name or IP address of the Avid ISIS System Director to
which you want to connect.
You cannot use the virtual server name or the virtual IP address of the remote host.
4. Click the Add button.
The Input dialog box opens.
n
The Client Manager user interface could take up to 30 seconds to display changes made in the
Remote Host Settings.
5. Click the green check mark to apply the settings or the red X to close the dialog box without
any changes.
Avid Interplay Authentication
Avid Interplay Authentication requires the Avid ISIS System Director to use a virtual name. The
System Director’s virtual name must not match the actual host name and must be entered in the
General Configuration Options dialog box even if your Avid ISIS system configuration only has
one System Director. For instructions on adding the virtual name, search the
Avid ISIS
Administration Guide
for General Configuration Options.
Configuring a 10-Gb Link Aggregation Group
The 10-Gb link aggregation connection is done using the 10-Gb port on the ISS. You can make a
10-Gb link aggregation connection on the left, right or both subnets. The number of 10-Gb links
you can create, depends on the number of 10-Gb ports available on your zone switch (Avid
Production Network switch). The following procedure describes the process. For an overview of
10-Gb link aggregation, see
“10-Gb Link Aggregation Overview” on page 44
.
To create a 10-Gb link aggregation:
1. Configure your Avid Production Network switch for your 10-Gb link aggregation
connections.
This process is not described in Avid documentation, see the documentation that comes with
your switch. For additional information on configuring qualified switches, search the
Knowledge Base for the
Avid ISIS Ethernet Switch Reference Guide
.
n
Avid Production Network switches need to be configured for Source Destination IP addresses in
terms of link aggregation load balancing. This is the default both in Avid ISIS switches and the
Avid Production Network switches that have been qualified, no other load balancing
configurations are supported.
