6
ZK830 Counting Scale User Instructions
General information and warnings
1.2 Installation
1.2.1 Safe handling of equipment with batteries
1.2.2 Wet conditions
Under wet conditions, the plug must be connected to the final branch circuit via an
appropriate socket / receptacle designed for washdown use.
Installations within the USA
should use a cover that meets NEMA 3R specifications
as required by the National Electrical Code under section 410-57. This allows the unit
to be plugged in with a rain tight cover fitted over the plug.
Installations within Europe
must use a socket which provides a minimum of IP56
protection to the plug / cable assembly. Care must be taken to make sure that the
degree of protection provided by the socket is suitable for the environment.
N O U S E R S E R V IC E A B LE P A R T S . R E FE R T O Q U A LIFIE D S E R V IC E
P E R S O N N E L FO R S E R V IC E .
Equipment to be powered by a UL Listed I.T.E. power supply: rated 12 -36VDC and
marked “LPS”, or a UL Listed power supply rated 12-36VDC and marked “Class 2.”
The Socket-Outlet shall be installed near the equipment and shall be easily
accessible.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer. Dispose
of used batteries according to the manufacturer’s instructions.
ATTENTION: Il y a danger d'explosion s'il y a remplacement incorrect de la
batterie, remplacer uniquement avec une batterie du même type ou d'un type
équivalent recommandé par le constructeur. Mettre au rebut les batteries
usagées conformément aux instructions du fabricant.
