Avery Weigh-Tronix ZK830, User Instructions

Page: 32 / 55

ZK830 Counting Scale User Instructions 33
4.6 About menu
4.6 About menu
The About menu is shown in Figure 4.3 .
Figure 4.3 About menu
Use this menu to display information about the various items shown in Figure 4.3 . Each
is explained below.
boot Use this to view the bootloader part number (PN) and version number.
When you view the bootloader PN only the 1st half is shown until you
press
UNITS to view the 2nd half.
FirM Use this to view the firmware part number and version. You need to press
UNITS to view the 2nd half of the part number.
APP Use this to view the application part number and version. You need to
press
UNITS to view the 2nd half of the part number.
Serial Use this to view the serial number of the indicator. The first four digits are
displayed. Press
UNITS to view the last five digits.
EnEt Use this item to view the values for the IP, Subnet, Gateway and MAC
addresses. Press the
ENTER key successively to see all parts of the
addresses.
BSQ
Sw Part Version Cur. Ser
xxxx xxxxx
xxxxxx
Serial
About
App. Enet Firm Boot
Version Partno
IP Gateway Subnet
Version Partno
Version Partno
Mac
1 xx
2 xx
3 xx
4 xx
5 xx
6 xx
1 xx
2 xx
3 xx
4 xx
1 xx
2 xx
3 xx
4 xx
1 xx
2 xx
3 xx
4 xx
xxxx xxxxx
Dload
Sserial Dserial
AWT30 XXXXX X.X.X.XX
AWT30 XXXXX
X.X.X.XX
AWT30 XXXXX
X.X.X.XX
Scale X
Cal. Ser
xxxx
xxxxxx
(View SN)
(View
license
number)
(View
software PN)
(View version) (View App PN )
(View Firmware PN)
(View version)
(View
license
number)
(View
software
version)
(View
current
cell SN)
(View version) (View
bootloader PN)
(View SN of
calibrated
cell)
If the indicator is connected to an ethernet network, the values displayed will be the
current assigned addresses.