Avery Weigh-Tronix ZK830, User Instructions

Page: 51 / 55

52 ZK830 Counting Scale User Instructions
Supervisor menu
8.3 Checkweighing application supervisor menu
Figure 8.3 shows the Supervisor menu when you are in the Checkweighing application:
Figure 8.3 Supervisor menu for the Checkweighing application
Follow these steps to set the items in the Supervisor menu.
8.3.1 Check menu item
1. With the Checkweighing application active, access the Supervisor menu using
password 1793. Refer to
Accessing the menus on page 29 for instructions. The
items relating to checkweighing are described on the following pages.
Lo toL This stands for Low Tolerance. Enter a weight value for the weight
tolerance below the target weight.
Hi toL This stands for High Tolerance. Enter a weight value for the weight
tolerance above the target weight.
undrdiv This stands for Under Divisions. Enter the number of divisions below your
low tolerance which will cause the first under segment to appear.
Super
Plu Battery Setpnt Totals App Pwr
Off On
Print
Off On
Prnft Clr Tot
Off On
In 1 In 2 In 3 Print Reset
None Print Units Select Tare
Zero F1 Accu Prnthld
Port 1 Port 2
No Yes
Check
Lo Tol Hi Tol Undrdiv Overdiv Latchou
Off On
EditPlu Clr Plu
Number Units TareSc1
lbs kg g
Update
Lo Limi Hi Limi
Tare All None
Enable Tmout
Off BSQ Other
Bold boxes and text
denote defaults.
1-3600
minutes
Enter
value
SELECT =
TARE =
PRINT =
UNITS =
ZERO =
SAMPLE/F1 = Escape or
Enter
value Enter
division
size
Enter
division
size
Enter print
format #
Create PLU
(1-40)
Enter 3-7
digit number
Enter 1-40
Enter tare
weight
Enter low
limit weight
Enter high
limit weight
All the submenus in Figure 8.3 , except for the cHEcK and PLU menus, are the same
as described in General Weighing application supervisor menu on page 45 . Go there
for information on those submenus. The cHEcK and PLU submenus are described
below.