ZK830 Counting Scale User Instructions
17
3.2 Counting application
Bulk sampling definition:
When sample parts are being added to the scale they must all be placed on the scale
at once, in other words, in bulk. If the sample is large enough to meet the minimum
weight requirements the piece weight is calculated and the count is displayed with no
extra button presses.
3.2.2 Remote base switching (optional keypad required)
If you have an extra base installed with the BSQ (it can be analog or digital), you can
switch between the two by pressing the
SCALE
key. Either scale can be used to take
samples. If enabled you can sample on one base and the display automatically
switches to the other scale for counting. Either base can be selected as the sampling
base.
3.2.3 Entering known tare weights and piece weights (optional keypad
required)
If you know a tare or piece weight you can quickly enter those values using these steps:
Entering a known tare weight (only if optional keypad attached)
In gross weight mode (
GROSS
annunciator lit), key in a tare weight and press the
TARE
key. The tare weight is active and the
NET
annunciator lights.
Entering a known piece weight
Key in a known piece weight and press the
PCWT
key. The piece weight becomes
active.
To view the current piece weight, press the
PCWT
key and the piece weight will be
shown for five seconds.
3.2.4 SELECT key default function
In the Count application you can view the gross, net, count and count total values by
repeatedly pressing
SELECT
.
At any time during the sampling process you can abort by pressing the
TARE/up
arrow
key.
To clear a tare weight, remove all weight from the scale and press the
TARE
key or
press and hold the
TARE
key for three seconds.
