ZK830 Counting Scale User Instructions
47
8.1 General Weighing application supervisor menu
tMout
This stands for timeout. Use this to set the length of time before inactivity
of the scale and keypad cause battery power to be shutoff. Values
between 1 and 3600 minutes are valid.
8.1.3 PLU menu item
Use this to create, edit or clear up to 40 part lookups.
EditPLu
Enter a PLU number from 1-40.
nuMbEr
Enter 3-7 digit identifier for this item or product.
unitS
Choose the unit of measure for this PLU.
tArE
Enter a tare weight for this PLU.
cLr PLu
Enter the PLU number you wish to clear all information from and press
ENTER
.
uPdAtE
If you have an active PLU, you can enable the user to update the tare
weight or not.
For example, if you allow the user to update the tare weight, with an active
PLU the user can get a new tare weight and press the
PLU
key once to
view the current PLU number then quickly press the
PLU
key twice more
to update the tare weight in the PLU.
8.1.4 Totals menu item
This function must be enabled in a password protected menu. If enabled, during normal
operation the user can press and hold
for three seconds and the selected total
print format will be sent out any port that is set up to print. The display will flash
Prn-tot
.
Turn the print function on or off for the totals.
PrnFt
Choose the print format number for the printout.
cLr tot
Enable or disable clearing the accumulated total after printing.
8.1.5 App Pwr menu item
Enable this to force the user to pick the application desired at the next power up.
This completes the Supervisor menu for General Weighing. Repeatedly press
TARE
until the indicator returns to normal weighing mode.
The current weight value is displayed.
The changes are saved automatically and the indicator reboots.
