10
ZK830 Counting Scale User Instructions
Introduction
2.2 Front panel
The front panel, shown in
, consists of the keys and display.
The normal function of the keys on the front panel are listed below. Some keys will have
special functions in certain applications. Details are provided in the individual
application sections.
Never press a key with anything but your finger. Damage to the overlay may result if
sharp or rough objects are used.
Press the
TARE
key to perform a tare function.
With no weight on the scale, press the
TARE
key to clear a tare value.
Acts as an up arrow key for menu navigation.
Allows you to access minus and comma signs.
Acts as an
ABORT
key during the sampling process.
Press the
SELECT
key to toggle between the active display values.
Press and hold to enter the setpoint editor in all applications.
Acts as a down arrow key for menu navigation.
Allows you to access minus and comma signs.
Press the
ZERO
key to zero the display.
Acts as an ENTER key to accept a displayed value or function.
Press the
to send information to a peripheral device through a configured
communications port. Press and hold the
key to print accumulated totals, if
enabled.
Acts as a left arrow key for menu navigation.
Press the
UNITS
key to scroll through the available units of measure while in normal
operating mode.
Acts as a right arrow key for menu navigation.
The
UNITS
key is disabled when displaying counts.
Press the
SAMPLE
key to select application specific choices.
Aborts a numeric entry and acts as an ESCAPE key in the menu navigation.
Press and hold to view the password entry screen for menu access.
Keys on the optional keypad shown below:
Press the
SCALE
key to switch between two attached scales.
Press the
PLU
key to access the PLU list. In the counting application this key can be
used to update piece weight and or tare weight if enabled.
Press the
PCWT
key to enter a known piece weight.
If enabled, allows the user to see a high resolution weight value.
In the count application allows you to enter or view piece weight values.
Use the numeric keypad to enter values or clear a value from the display (C key).
TARE
SELECT
ZERO
UNITS
SAMPLE
F1
SCALE
F2
PLU
F3
PCWT
F4
1 2 3
4 5 6
7 8 9
C 0 .
