Avermedia IWH3216 Touch, User Manual

Page: 131 / 185

125
- Send E-mail
Send an electronic text message. To setup click Detail (see also To Setup Send E-mail ).
- File Transmission via FTP
Upload file to remote computer thru FTP (File Transfer Protocol). To setup click Detail (see also To
Setup FTP ).
- Start Recording
Record the video from the selected camera. To setup click Detail (see also To Setup Alarm
Recording ).
- Alarm SOP (Standard Operation Procedure)
List the instructions to inform the person of what to do when the alarm is activated. To setup click
Detail (see also To Setup Alarm SOP ).
- Send to CMS (Central Management System)
Enable/disable the selected camera to send video to CMS when the alarm is activated (see also To
Setup CMS Setting )
To Setup Send E-mail Setting
Next to the Send Email check box, click Detail . In the E-mail Setting dialog box, click OK to exit and
save the setting and Cancel to exit without saving the setting.
(1) SMTP Server: Enter the SMTP Server and port. If your e-mail system requires user identification,
enable Authentication check box and enter User ID and Password.
(2) Mail: To check if it is working, click Test Account button.
- From: Enter the sender e-mail address.
- To and CC: Enter the recipient email address and separate it with comma or a semicolon (;).
- Subject: Enter the message title.
- Message: Type the message.
(3) Email Notice Setting
- Notice Interval: Set the period of time before it sends another e-mail notice.
- Embedded image: Select the image size and set the number of frames.
- Attach image when sensor is triggered: When the sensor is triggered, the system will capture
the image and send the image to the certain e-mail address with the alarm message.
(4) Modem Dial up Setting
User may set the time to disconnect automatically, just enable the Auto Disconnect after check
box and set time.
(1)
(2)
(3)
(4)