Aventura DHN Series User Manual Download Page 88

Page: 88 / 178

DHN Series Network Video Recorder User Manual

Figure 7. 17

Event Search for Backup

Select record files to export.

Clicking

Quick Export

button will export record files of all channels triggered by the selected alarm

input.

Figure 7. 18

Result of Event Search

Click

Details

button to view detailed information of the record file, e.g. start time, end time, file size, etc.

Export.

Click

Export All

button to export all the recording files.

Or you can select recording files you want to back up, and click

Export

button to enter Export interface.

If the inserted USB device is not recognized:

•

Click the Refresh button.

•

Reconnect device.

•

Check for compatibility from vendor.

You can also format USB flash drive or USB HDDs via the device.

Summary of Contents for DHN Series



















































































































































































Search results

Summary of Contents for DHN Series

Reviews:

Related manuals for DHN Series

Brands by name

Popular brands

Aventura DHN Series, User Manual

Search results

Summary of Contents for DHN Series

Reviews:

Related manuals for DHN Series

Brands by name

Popular brands