Aventura DHN Series User Manual Download Page 36

Page: 36 / 178

DHN Series Network Video Recorder User Manual

Figure 3. 5

Live View Strategy

Move the mouse onto the icon to show the real-time stream information, including the frame rate, bitrate and

resolution.

3.3

Adjusting Live View Settings

Purpose:

Live View settings can be customized according to different needs. You can configure the output interface, dwell

time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.

Steps:

Enter the Live View Settings interface.

Menu> Configuration> Live View

Figure 3. 6

Live View-General

The settings available in this menu include:

•

Video Output Interface:

Designates the output to configure the settings for. Outputs include HDMI

(depends on the model), VGA, Main CVBS and Spot Output.

No CVBS spot out for DHN-04H series NVR.

•

Live View Mode:

Designates the display mode to be used for Live View.

•

Dwell Time:

The time in seconds to

dwell

between switching of channels when enabling auto-switch in Live

View.

•

Enable Audio Output:

Enables/disables audio output for the selected video output.

•

Volume:

Adjust the volume of live view, playback and two-way audio for the selected output interface.

Summary of Contents for DHN Series



















































































































































































Search results

Summary of Contents for DHN Series

Reviews:

Related manuals for DHN Series

Brands by name

Popular brands

Aventura DHN Series, User Manual

Search results

Summary of Contents for DHN Series

Reviews:

Related manuals for DHN Series

Brands by name

Popular brands