Aventura DHN Series User Manual Download Page 65

Page: 65 / 178

DHN Series Network Video Recorder User Manual

Chapter 6

Playback

6.1

Playing Back Record Files

6.1.1

Playing Back by Channel

Purpose:

Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported.

Instant playback by channel

Steps:

Choose a channel in live view mode using the mouse and click the

button in the quick setting toolbar.

In the instant playback mode, only record files recorded during the last five minutes on this channel will be

played back.

Playback by channel

Enter the Playback interface.

Mouse: right click a channel in live view mode and select Playback from the menu, as shown in Figure 6. 11.

Figure 6. 1

Right-click Menu under Live View

Summary of Contents for DHN Series



















































































































































































Search results

Summary of Contents for DHN Series

Reviews:

Related manuals for DHN Series

Brands by name

Popular brands

Aventura DHN Series, User Manual

Search results

Summary of Contents for DHN Series

Reviews:

Related manuals for DHN Series

Brands by name

Popular brands