DHN Series Network Video Recorder User Manual
24
2.3
Adding and Connecting the IP Cameras
2.3.1
Adding the Online IP Cameras
Purpose:
The main function of the NVR is to connect the network cameras and record the video got from it. So before you
can get a live view or record of the video, you should add the network cameras to the connection list of the device.
Before you start:
Ensure the network connection is valid and correct. For detailed checking and configuring of the network, please
see
Chapter Checking Network Traffic
and
Chapter Configuring Network Detection.
OPTION 1:
Steps:
1.
Right-click the mouse when you in the live view mode to show the right-click menu.
Figure 2. 9
Right-click Menu
2.
Select
Add IP Camera
in the pop-up menu to enter the IP Camera Management interface.
3.
The online cameras with same network segment will be displayed in the camera list. Click the
button to
add the camera.
Or you can click the
One-touch Adding
button to add all the online IP cameras.
Table 2. 1
Explanation of the icons
Icon
Explanation
Icon
Explanation
Edit basic parameters of the camera
Add the detected IP camera.
The camera is connected.
The camera is disconnected; you can
click the icon to get the exception
information of camera.
Delete the IP camera
Advanced settings of the camera.
Summary of Contents for DHN Series
Page 1: ...DHN Series Network Video Recorder User Manual REV 20140423...
Page 99: ...DHN Series Network Video Recorder User Manual 98 Figure 7 35 Synchronizing...
Page 146: ...DHN Series Network Video Recorder User Manual 145 Figure 10 26 View HDD Status 2...
Page 155: ...DHN Series Network Video Recorder User Manual 154 Figure 12 6 HDD Information Interface...
