DHN Series Network Video Recorder User Manual
165
13.5
Managing User Accounts
Purpose:
There is a default account in the NVR:
Administrator
. The
Administrator
user name is
admin
and the password is
12345
. The
Administrator
has the permission to add and delete user and configure user parameters.
13.5.1
Adding a User
Steps:
1.
Enter the User Management interface.
Menu >Configuration>User
Figure 13. 5
User Management Interface
2.
Click the
Add
button to enter the Add User interface.
Figure 13. 6
Add User Menu
3.
Enter the information for new user, including
User Name
,
Password
,
Level
and
User’s MAC Address
.
Level:
Set the user level to Operator or Guest. Different user levels have different operating permission.
•
Operator:
The
Operator
user level has permission of Two-way Audio in Remote Configuration and all
operating permission in Camera Configuration by default.
•
Guest:
The Guest user has no permission of Two-way Audio in Remote Configuration and only has the
local/remote playback in the Camera Configuration by default.
User’s MAC Address:
The MAC address of the remote PC which logs onto the NVR. If it is configured and
enabled, it only allows the remote user with this MAC address to access the NVR.
4.
Click the
OK
button to save the settings and go back to the User Management interface. The added new user
will be displayed on the list, as shown in Figure 13. 7.
Summary of Contents for DHN Series
Page 1: ...DHN Series Network Video Recorder User Manual REV 20140423...
Page 99: ...DHN Series Network Video Recorder User Manual 98 Figure 7 35 Synchronizing...
Page 146: ...DHN Series Network Video Recorder User Manual 145 Figure 10 26 View HDD Status 2...
Page 155: ...DHN Series Network Video Recorder User Manual 154 Figure 12 6 HDD Information Interface...
