DHN Series Network Video Recorder User Manual
102
Figure 8. 5
Set Arming Schedule of Alarm Input
Choose one day of a week and Max. eight time periods can be set within each day, and click
Apply
to save
the settings.
Time periods shall not be repeated or overlapped.
Repeat the above steps to set up arming schedule of other days of a week. You can also use
Copy
button to
copy an arming schedule to other days.
5.
Select
Linkage Action
tab to set up alarm response actions of the alarm input (please refer to
Chapter
Setting Alarm Response Actions
).
6.
If necessary, select PTZ Linking tab and set PTZ linkage of the alarm input.
Set PTZ linking parameters and click
OK
to complete the settings of the alarm input.
Please check whether the PTZ or speed dome supports PTZ linkage.
One alarm input can trigger presets, patrol or pattern of more than one channel. But presets, patrols and
patterns are exclusive.
Figure 8. 6
Set PTZ Linking of Alarm Input
7.
If you want to set handling action of another alarm input, repeat the above steps.
Or you can click the
Copy
button on the Alarm Input Setup interface and check the checkbox of alarm inputs
Summary of Contents for DHN Series
Page 1: ...DHN Series Network Video Recorder User Manual REV 20140423...
Page 99: ...DHN Series Network Video Recorder User Manual 98 Figure 7 35 Synchronizing...
Page 146: ...DHN Series Network Video Recorder User Manual 145 Figure 10 26 View HDD Status 2...
Page 155: ...DHN Series Network Video Recorder User Manual 154 Figure 12 6 HDD Information Interface...
