Avaya CMC1, Maintenance Procedures

Page: 402 / 426

Additional maintenance procedures
Automatic Transmission Measurement System
402 Maintenance Procedures
December 2003
Measurement data gathered by analog testcalls can be retrieved with the list testcalls command as
described in
ATMS reports on page 403 . The measurements that are made and recorded depend on the
type of test that is specified and the capabilities of the far-end TTL.
Figure 120, Test results for test analog-testcall trunk 60, on page 402 shows a typical result for test
analog-testcall trunk 60 .
Figure 120: Test results for test analog-testcall trunk 60
Output fields
Field Description
Port The physical location of the port supporting the trunk being
tested.
Maintenance Name The name of the maintenance object tested, TIE-TRK or CO-
TRK.
Alt. Name The trunk-group number and member number of the trunk
being tested.
Test Number ATMS tests are numbered 844 through 848.
Result • If the test call successfully completes, and if every
trunk tests within administered thresholds for
marginal and unacceptable performance, then a PASS
result is returned.
• If measurements fall outside the thresholds, the test
fails. The trunks group can be administered to log
errors and alarms, and to busy out the failed trunk.
• If the test call cannot be completed, an ABORT is
returned.
Error Code This numerical code indicates the reason for a failure or
abort. The codes are explained in the CO-TRK and TIE-TRK
sections of
ABRI-PORT (ASAI ISDN-BRI Port) in
Maintenance Alarms Reference (555-245-102).
test analog-testcall trunk 60
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
02B1901 TIE-TRK 060/001 845 PASS
02B1902 TIE-TRK 060/002 845 PASS
02B1903 TIE-TRK 060/003 845 PASS
02B1904 TIE-TRK 060/004 845 ABORT 1004
02B1905 TIE-TRK 060/005 845 PASS
02B1906 TIE-TRK 060/006 845 ABORT 1004