background image

 

90-8M0065210   MARCH  2012 

 © 2012 Mercury Marine 

 Page  1 / 5

NMEA 2000 GATEWAY ASSEMBLY

Notice

NOTICE

After completing installation, these instructions should be placed with the product for the owner's future use.

NOTICE

This document is written to aid our dealers and company service personnel in the proper installation or service of
our products. Persons who are not familiar with these or similar products produced by Mercury Marine, and who
have not been trained in the recommended servicing or installation procedures should have the work performed
by an authorized Mercury Marine dealer technician. Improper installation or servicing of the Mercury product could
result in damage to the product or personal injury to the installer or persons operating the product.

Gateway Assemblies

a -

Single engine Gateway

b -

Helm Gateway (Axius and Zeus

installations)

c -

Multi Engine Gateway

Components in Kit

a -

Gateway module

b -

Cable ties (2)

c -

10‑16 x 0.88 in. mounting screws (4)

d -

NMEA "T" connector

Features

The CAN light and NMEA light will turn on when data is being transmitted through the Gateway.

a

b

c

49890

a

b

c

d

50047

Summary of Contents for NMEA 2000






Reviews: