Avaya CMC1, Maintenance Procedures

Page: 64 / 426

Access and login procedures
Laptop settings and connections
64 Maintenance Procedures
December 2003
4 If
Use a proxy server for your LAN
is not selected, no change is necessary; click
Cancel
to
exit.
5 If Use a proxy server for your LAN is selected, you can:
• Deselect it and click
OK
to exit;
• Or, you can leave it selected and configure your browser to bypass the proxy server
whenever you are connected to the S8300 services port as follows:
— Click
Advanced.
— Type 192.11.13.6 in the Exceptions box. If there are other entries in this box, add
to the list of entries and separate entries with a “;”.
— Click OK to exit.
For Netscape
1 Select Edit > Preferences .
2 Under Category, click
Advanced
.
3 Click Proxies .
4 If
Direct connection to the Internet
is selected, no change is necessary; click
Cancel
to exit.
5 If Direct connection to the Internet is not selected, you can:
• Select it and click
OK
to exit;
• Or, you can leave it unselected and configure your browser to bypass the proxy server
whenever you are connected to the S8300 services port as follows:
— Select
Manual Proxy Configuration
and click
View.
— Type 192.11.13.6 in the Exceptions box (or in the No Proxy for: box in later
versions of Netscape). If there are other entries in this box, add to the list of entries
and separate entries with a ";".
— Click OK to exit.
Laptop connections
To connect your laptop directly to the S8300 Media Server:
1 Make sure your laptop meets the hardware and software requirements.
2 Plug an Ethernet crossover cable (MDI to MDI-X) into the 10/100 BaseT Ethernet network
interface card (NIC) on your laptop.
• Crossover cables of various lengths are commercially available.
• See the Table 30, Crossover cable pinout chart, on page 65 for pinout connections if
needed. Crossover of the transmit and receive pairs (as shown) is required.