Avaya 9601, User Manual, Page: 43 / 178

2-20
MDF/lDF DESIGN: SYSTEM 85 AND DEFINITY GENERIC 2 WITH TRADITIONAL MODULES
Use the type-2 frame (described under Recommended Frames for Terminal Blocks earlier in this chapter)
to design a zoned MDF that is terminating up to 16 modules. Table 2-6, Module Allocation per Zone
with Type-2 Frame, shows the number of modules allocated per zone when you design an MDF with a
type-2 frame. Each type-2 frame can accommodate 4000 jumper pairs per side. Figure 2-11. Zone
Arrangement of Type-2 Frame — Plan View, and figure 2-12, Zone Arrangement of Type-2 Frame —
Front View, Zone 2, show a type-2 frame used in a zone arrangement.
TABLE 2-6. Module Allocation per Zone with Type-2 Frame
Number of
Number of Number of
Modules
zones Modules for Zone
1-8 1 1-8
9 2 4 , 5
10
2 5 , 5
11
2 5 , 6
12 2 6 , 6
13
2 6 , 7
14 2 7 , 7
15 2 7 , 8
16
2 8 , 8
NOTE:
Custom-engineer all installations over 16 modules.