Avaya 9601, User Manual, Page: 13 / 178

ABOUT THIS DOCUMENT xiii
ORGANIZATION OF THIS GUIDE
This document consists of the following chapters and appendixes:
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Chapter 1, Overview: System 8.5 and DEFINITY Generic 2 with Traditional Modules — A brief
description of the System 85 and DEFINITY Generic 2 traditional modules’ principal components,
including remote module interfaces (RMIs) and remote group interfaces (RGIs), and their operation
Chapter 2, MDF/IDF Design: System 85 and DEFINlTY Generic 2 with Traditional Modules —
Detailed guidelines for designing an MDF and general guidelines for designing an IDF
Chapter 3, Electrical Protection: System 85 and DEFINITY Generic 2 with Traditional Modules —
A discussion of primary, enhanced primary, secondary, and combination electrical protectors for the
System 85 and DEFINITY Generic 2 with traditional modules including remote modules when
distribution cabling is exposed to electrical hazards.
Chapter 4, Port Packs/DCP Repeaters: System 85 and DEFINITY Generic 2 with Traditional
Modules — Cross-references between port circuit packs, their terminations on the MDF, and the
terminals that they serve, as well as a discussion of Digital Communications Protocol (DCP)
repeaters for digital terminals
Chapter 5, Installation Example: System 85 and DEFINITY Generic 2 with Traditional Modules —
An example of an MDF designed to accommodate a hypothetical seven-module system 85 or
DEFINITY Generic 2 with traditional modules
Chapter 6, Overview: DEFINITY Generic 2 with Universal Modules — A guide to the major
differences and important features of DEFINITY Generic 2 with universal modules that are not
available in System 85 and DEFINITY Generic 2 with traditional modules
Chapter 7, MDF/IDF Design: DEFINITY Generic 2 with Universal Modules — Designing the MDF
and IDF for DEFINITY Generic 2 with universal modules
Chapter 8, Electrical Protection: DEFlNITY Generic 2 with Universal Modules — Electrical
protection scheme for DEFINITY Generic 2 with universal modules
Chapter 9, Port Packs: DEFINTY Generic 2 with Universal Modules — Port packs and terminals
supported in the Generic 2 universal configurations
Chapter 10, Installation Example: DEFINITY Generic 2 with Universal Modules — A sample
installation of a DEFINITY Generic 2 with universal modules
Chapter 11, BRI: DEFINITY Generic 2 with Universal Modules — A brief overview of basic rate
interface wiring principles, terminals, and power supplies as they apply to DEFINITY Generic 2 with
universal modules
Chapter 12, Adjunct Power Supplies —Information and guidelines for adjunct power supplies, loop
ranges, and applications for System 85 and DEFINITY Generic 2
Chapter 13, Fiber-Optics — A brief chapter explaining fiber-optics as it applies to the System 85
and DEFINITY Generic 2
Chapter 14, Insert Labels — Partial reproductions of the sheets of insert labels used to identify cable
terminations on the MDF and IDFs
A glossary and index appear at the end of this document.