AUX ASW-07B4/HSAR, Service Manual

Page: 95 / 159

Expelling the air in the pipes and the indoor unit Connecting the pipes and wires
Testing
Selection of the installation position
Indoor Unit
z
There is no heating and steaming source
nearby.
z
No obstacles for installation position
from nearby.
z
Keep good air circulation.
z
Convenient to adopt measures to reduce
noises.
z
Don’t install them near the
doorway.
z
Make sure to have the distance
specified in the picture between the ceiling,
wall, furniture and other obstacles.
z
2 meters high above the floor.
Outdoor Unit
z
In case that you put up a canopy to protect it from rains and sunrays, pay attention not to
cause any obstacles for the heating dispersion for the condenser.
z
Don’t keep animals or plants near the installation location for the hot air from the outdoor unit
will affect them.
z
Make sure to have the distance specified in the picture between ceiling, wall, furniture and
other obstacles.
z
Stay away from heating source and inflammable air.
z
The installation base and supporting frame should be strong and secure. The machine should
be at a level surface.
Installation of the Outdoor Unit
z
The outdoor unit must be firmly fixed to
avoid falling in strong wind.
z
Install on the cement base as in the
drawing.
z
If it is installed at seaside or at a place high
above the ground and with strong wind, the AC should be installed against the wall to ensure
the normal operation of the fan and the blocking plate should be used.