conditioner will work under the mode of dehumidification (always
mute).
2.4 When the indoor temperature reaches less than 20 , the air
conditioner will work under the mode of heating.
2.5 Under this mode, the air conditioner will operate in the respect of
blowing rate as set and its pendulum leaves will work according to
the requirements of automatic ventilation door.
2.6 Once the operation mode is selected, it will not be able to be
changed. When the air conditioner is shut down and then restarted,
the operation mode will be selected once again based on the
variation of indoor temperature.
2.7 After the operation indicator has been flickering for 20 seconds, it
will turn light steadily (i.e. the determination of operation mode will
start in 20 seconds.)
2.8 This mode has timing function, does not have sleep function.
2.9 Under this operation mode, the temperature can be set and adjusted
by remote control.
3.
Refrigeration mode
3.1 Under the refrigeration mode, the range of temperature set by
remote control is between 16 and 32 .
3.2 Shut-down of four-way valve;
3.3 The condition on which the compressor starts is that the indoor
Summary of Contents for ASW-07B4/HSAR
