![background image](http://html1.mh-extra.com/html/autoscript/e-p-i-c-17-inch-tft/e-p-i-c-17-inch-tft_user-manual_3022793035.webp)
33
Maintenance
Routine Maintenance
The E.P.I.C. TFT on-camera prompters requires minimal routine
maintenance, apart from checking the connections and overall
operation periodically.
Routine checks
During use, check the following:
•
Check cables for signs of wear or damage. Replace as necessary.
•
Check that all cables are connected properly.
Cleaning
Prompter Assembly Cleaning
During normal use the only cleaning required should be a regular wipe
over with a dry, lint-free cloth. Dirt accumulated during storage or
periods of disuse may be removed with a vacuum cleaner. Particular
attention should be paid to all connection ports on the monitor.
Reflective Glass Cleaning
Care and cleaning of the reflective glass panel is essential for
increased life and prompting display performance.
No solvents or glass cleaners should be used. Only use clean water
and a damp lens cloth when cleaning. Do not apply excessive pressure
to the reflective glass panel during the cleaning process.
Changing the Fuse
1.
Switch OFF and disconnect the power. It is not necessary to
remove the payload or other cabling.
2.
Using a flat-blade screwdriver, remove the fuse holder and discard
the blown fuse.
3.
Replace the fuse, then reinstall the fuse holder.
WARNING!
Risk of electric shock. Disconnect and isolate
the product from the power supply before cleaning.
WARNING! Risk of personal injury or injury to others
.
Care must be taken when handling or cleaning the reflective
glass panels. Always store spare glass panels in the
original packaging.
WARNING!
Risk of electric shock. Disconnect the power
cable. Fuses must only be changed by a trained and
competent person.
CAUTION!
The replacement fuse must be the correct
rating: Type 20mm ceramic tube fuse rated at 2A 250V AC