22
Installation
Fitting the ClockPlus-E
1.
Remove the four fixing screws from the Tally Light cover.
2.
Remove the Tally Light cover from the front of the monitor to
expose the interface connector for the ClockPlus-E.
3.
Align the ClockPlus-E connector with the interface connector on
the monitor. Fit the the ClockPlus-E to the monitor.
4.
Tighten the
thumbscrews on either
side of the ClockPlus-E.
WARNING!
Before attempting to install or adjust
accessories, the tilt axis of the head support must be
securely locked horizontally (tilt axis).
The Tally Light cover must be removed before fitting the
ClockPlus-E
