17
Installation
Fitting the Hoods
When the hood has been assembled, it can be installed onto the
prompter assembly.
Fitting the Moulded Hood - Both Sizes
1.
Align the clamps on the ends of the hood brackets with the slot in
the top of the extrusion. Slide the hood assembly onto the
extrusion.
2.
Centralise the hood assembly with the lens and prompter monitor,
and tighten the clamp locks to secure firmly in position.
Fitting the Extra Wide Folding Hood
1.
Align the clamps on the ends of the hood brackets with the slot in
the top of the extrusion. Slide the hood assembly onto the
extrusion.
2.
Centralise the hood assembly with the lens and prompter monitor,
and tighten the clamp locks to secure firmly in position.
