9
Installation
Mounting the Camera and Extrusion
A pair of telescopic rods must be used to mount the prompter system.
A camera mounting plate must be fitted between the head support and
the camera body to allow installation of the prompter system. Different
sizes of mounting plates are available, depending on the type of
camera being used.
For more information on the camera mounting plate options available,
see the section
Direct Mounting to the Camera Head Support
1.
Fit the camera and any fixing plate being used to the top of the
camera head support.
2.
Screw the telescopic rods (TR7 or 12) into the mounting holes on
the front of the camera head support.
WARNING!
Before attempting to install or adjust the
prompter assembly, the tilt axis of the head support must be
securely locked horizontally (tilt axis).
