19
Installation
Fitting the Reflective Glass Panel
When the hood has been installed, the reflective glass panel can be
fitted to the prompter assembly.
Panel Orientation
For the E.P.I.C. prompter to display images, it is essential that the
reflective side of the glass is installed facing outwards. The reflective
side of the glass can be established as follows:
Carefully hold a blunt
object such as a coin
against the surface of the
glass.
If the object is being held
against the reflective side,
there will be no gap (depth
of the glass) before the
reflection.
Fitting the Glass Panel
The installation procedure for the glass panel is the same on all types
of hood, although there are more fixing screws on the larger hoods.
1.
Remove all the fixing
screws from the top
of the hood to
release the top
glazing bar.
2.
Carefully position the glass panel on the bottom glazing bar inside
the hood.
WARNING! Risk of personal injury or injury to others
.
Care must be taken when handling and installing the
reflective glass panels. Always store spare glass panels in
the original packaging.
WARNING!
Only use the correct size glass panel designed
for the installed hood.
