3
Safety and About this Manual
Basic Electrical Insulation (Class 1 equipment)
Mounting and Installation
Water, Moisture and Dust
Ventilation
Operating Environment
Cleaning
Maintenance
About this Manual
The E.P.I.C. high brightness on-camera prompter is available with SDI
connection ports. This manual describes the installation of the prompter
onto a suitable camera support.
WARNING!
This product is Class 1 equipment. For safe
operation this equipment must be connected to a power
supply that has a protective earth connection (US: ground).
WARNING!
Before attempting to install or adjust the
prompter assembly, the tilt axis of the head support must be
securely locked horizontally.
WARNING!
Do not install this product onto a camera
support or other equipment that is not designed to support
the weight of the product and its payload.
WARNING!
Always ensure that all power and auxiliary
communications cables are routed so that they do not
present any danger to personnel. Take care when routing
cables in areas where robotic equipment is in use.
WARNING!
Protect the product from water, moisture and
dust. The presence of electricity near water can be
dangerous.
WARNING!
When using this product outside, protect from
rain using a suitable waterproof cover.
WARNING!
Slots and openings are intended for ventilation
purposes to ensure reliable operation of the product, and
protect it from overheating. Do not block or cover any slots
and openings.
CAUTION!
The product should not be used outside the
operating temperature limits. Refer to the product technical
specifications for the operating limits for the product.
WARNING! Risk of electric shock
. Always disconnect and
isolate the product from the power supply before cleaning.
CAUTION!
Do not use solvent or oil-based cleaners,
abrasives or wire brushes.
WARNING!
Servicing or repair of this product must only be
performed by qualified and trained electrical engineers.
WARNING!
The fitting of non-approved parts and
accessories, or the carrying out of non-approved alterations
or servicing can be dangerous and could affect the safety of
the product. It may also invalidate the terms and conditions
of the product warranty.
