26
Installation
Additional Adjustments
Additional adjustments can be made to the camera mounting plate and
prompter assembly if balancing cannot be achieved or there are
specific requirements for an installation.
MT-BLACK Adjustments
The top camera mounting plate can be moved to offset the position of
the camera, by removing the bottom screws with a 4 mm Allen key and
reseating the assembly in the other four screw holes.
The rod mounting blocks can be moved to different screw hole positions
on the mounting plate as required, by removing the block fixing screws
with a 5 mm Allen key.
Camera Support Adjustments
If necessary, further balancing and positional adjustments can be made
to the camera head support (manual or robotic).
WARNING!
Before attempting to adjust the prompter
assembly, the tilt axis of the head support must be securely
locked horizontally (tilt axis).
WARNING!
Before attempting to adjust the positions of the
mounting blocks on the camera plate, the counterbalance
weights and prompter assembly must be removed.
