5. Drive by PC
39
© Copyright Reserved Autonics Co., Ltd.
④
JOG operation
Display
Operation
+ button
Outputs drive pulses in + direction.
- button
Outputs drive pulses in - direction
button
Stops the drive.
Preset value
Configures the movement amount in pre-set operation. This value applies the scale
function. Refer to the item of pulse scale numerator in parameter configuration.
Speed 5
Configures the value of speed 5. The range is 1~8000.
If you click the increment/decrement button(▼ ▲), the configuration value is
increase/decrease depending on the selection of the increment.
The actual drive pulse speed is the configuration value multiplied by the speed multiplied
(see parameter configuration). If the speed 5 is selected, the speed can be changed in
driving according to the change of the configured value.
Speed 5 Rate
Determines the speed increment of Speed 5.
If 10 is selected, the value of the Speed 5 is increased/decreased as many as 10 once
you click the increment/decrement button(▼ ▲).
Position
Displays the current position. It ignores the power ON mark.
If the Home Search is executed, zero is displayed. If you click the position clear button
(C button), you can clear the current position at any position. This value applies the
scale function. Refer to the item of pulse scale numerator in parameter configuration.
Speed
Displays the current speed in driving.
C button
Makes the Position value(current position) as zero.
JOY Stick
If you click the joy stick button on the main screen, the following screen pops up.
The joy stick can freely configure the position of X+, X-, Y+ and Y- keys and can drive X and Y axes at the
same time.
⑤
Home Search execution
This function executes the Home Search of each axis.
The selection of Home Search mode or Home Search speed is configured on the parameter/mode screen.
Display
Operation
X, Y
Selects the axis to carry out the Home Search.
Run
Starts the Home Search.
Stop
Stops the Home Search.
