5. Drive by PC
46
© Copyright Reserved Autonics Co., Ltd.
End P
ABS, INC, HOM
1 : Output the end pulse after running the command
0 : No-output after running the command
【
Caution
】
For 1, the drive end pulse must be enabled in
mode configuration.
Other command
Not required to configure
Both
ABS, INC and HOM on X axis
1 is configured when the same commands executes the
drive on Y axis.
Other command
Not required to configure
●
Reset : If the Reset button is pressed before the Enter button is pressed, the input data is reset and
the previous data is displayed.
【
Caution
】
After entering data, press the Enter button to update the program.
File menu
The File(F) menu on the Program Edit screen has Save, Open commands for the operation program.
This menu has the same function with the File menu of the main screen.
Edit menu
The Edit (E) menu of the Program Edit screen is listed as shown the table below.
Item
Function
Description
Cut
Clear of the selected area
Move the selected area to the clipboard. In online state, the program
data of the changed register is added to the main body.
Copy
Copy of the selected area Copy the selected area to the clipboard.
Paste
Paste
Paste the selected area to the current register. In online state, the
program data of the changed register is added to the main body.
Delete Deletion of lines
Delete the selected register in line unit. The register number after
the deletion can be advanced. In online state, the program data after
the deleted line is added to the main body.
Insert
Insertion of lines
Insert blanks to the selected line. If the last line number of the
program after inserting blanks is over 63 with the numbers or more
than 63 are deleted. In online state, the inserted program data is
added to the main body.
