AutomationDirect C-more EA9-T10CL, Hardware User Manual

Page: 95 / 140

Chapter 5 - System Setup Screens
5-4
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Accessing the System Setup Screens (with project loaded)
To access the Main Menu of the touch panel System Setup Screens with a project loaded into
memory, press the upper left corner of the panel display area for 3 seconds as shown below.
If no system screen password is enabled, the following WARNING dialog box will appear on
the touch screen.:
• Pressing OK will display the system setup screen.
See the WARNING below!
• Pressing Cancel will take you back to the project screen.
• Communications with the PLC is active while the
Warning is displayed.
• The dialog box will close if no action is taken for 60
seconds.
• The dialog box will not display if the touch panel does
not have a project loaded.
• The dialog box will display after a valid password is
entered if the System Screen password is enabled.
WARNING: Pressing OK at this point will STOP the PLC driver and therefore all communications
between the touch panel and PLC will cease. It is strongly recommended that the password system tag
“SYS SYSTEMSCREENPW” be enabled to add a safeguard step in accessing the system setup screens.
See the next section for an overview for setting the System Tags in the Event Manager Database.
Cancel OK
System Screen Called
Activating System Screen will stop the
Panel Run Mode.
Do you want to continue?