AutomationDirect C-more EA9-T10CL, Hardware User Manual

Page: 129 / 140

Chapter 5 - System Setup Screens
5-38
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Memory – Backup (cont’d)
NOTE: The following definitions are for the various file types that can be backed up:
Project data – consists of the actual developed project data that is created in the C-more programming software
and includes all functionality, objects, screens, tag names, labels, comments, graphics, etc. Included in backup file
name StartupStorage.eas9.
Recipe data
–
consists of all the data values and labels that have been created for the various recipe sheets.
Includes all recipe sheets loaded to the panel. Only recipe sheets used in the project are loaded to the panel.
Firmware – consists of the operating system, firmware and run time files. Included in backup file name
StartupStorage.eas9.
Log data – consists of the Alarm Log, Message Log and Trend Data Logging files.
Select the data file(s) to be backed up by pressing the appropriate data file button. The
selection will be highlighted.
Pressing the highlighted data file button again will
turn it off.
The Next >> button will stay grayed out until at least
one data file is selected.
Any file type not available will be grayed out.
The Next >> button is now enabled.
Pressing Cancel will return to the previous menu.
Press the Next button to continue.
NOTE: In the case of the Project and Firmware files, these can be Restored later to another panel.
Recipe files can be edited externally from the panel and then Restored to the panel.
The Log files are for viewing purposes only.
See Memory - Restore later in this chapter for instructions on Restoring the Project, Firmware and or Recipe files
to a Panel.