AutomationDirect C-more EA9-T10CL, Hardware User Manual

Page: 112 / 140

Chapter 5 - System Setup Screens
5-21
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Setting – Adjust Touch Panel
This procedure is used to calibrate the touch screen to ensure accuracy of the touch areas.
There are five points on the touch screen that the calibration is based around. The adjustment
relies on very narrow areas for the calibration points.
NOTE: The panel will display the Adjust Touch Panel window on power up until the calibration procedure is
completed.
2
1
3a
3b
3c
3e
3d
Item No. Function Description Comment
1 Start Calibration
Press to begin the touch screen calibration
2 Cancel
Press to return to the Setting Menu screen.
3 Points 3a thru 3e
The touch screen calibration crosshairs will
appear individually in the order of point 3a
thru 3e respectively as each proceeding
crosshair is pressed.
If the touched co-ordinate point is
too far off from normal, then the
procedure will return to Point 3a.