AutomationDirect C-more EA9-T10CL, Hardware User Manual

Page: 75 / 140

Chapter 3 - Accessories
3-10
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Non-glare Screen Covers (cont’d)
Clear Screen Overlay Installation
Check to be sure that the proper size non-glare screen cover is being
used on the subject touch panel. Notice that the outer perimeter of the
screen cover has an adhesive band. The adhesive band will be located
on the outside edge of the touch panel’s white frame bordering the
touch area when installed.
Step 1
Start in one corner and peel the screen cover from the backing.
Step 2
Step 3
Align the screen cover over the touch panel’s white frame, then start
on one side and gently lay the cover over the entire touch area.
Step 4
Smooth out the screen cover and press all around the outside
perimeter to secure the cover in place. The screen cover can be
removed by lifting up on the small tab and gently pulling the cover
away form the touch panel’s surface.
Step 5
Remove the protective sheet.
NOTE: The protective cover ships with a thin protective sheet on the face of the cover that needs to be carefully
removed. If your panel is not clear, the protective sheet may not have been removed.