AutomationDirect C-more EA9-T10CL, Hardware User Manual

Page: 81 / 140

Chapter 4 - Installation and Wiring
4-4
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
EA9-T6CL-R, EA9-T6CL, EA9-T7CL-R and EA9-T7CL
Cutout Dimensions
The C-more 6” and 7” touch panels are mounted into a cutout through the control cabinet
and secured with four (4) mounting clips. The mounting clips are provided with the touch
panel. The mounting clips will insert into a series of slots around the rear perimeter of the
touch panel. Each clip has a tab that will mate to a slot. The screw of each mounting clip
needs to be tightened to the torque rating shown in the table below so that the gasket is
compressed to form the proper seal between the panel and cabinet surface.
Enclosure Mounting Thickness Ranges
and Mounting Clip Screw Torque
Touch
Panel Size
Enclosure
Thickness Range
Mounting Clip
Screw Torque Material
6”, 7”, 8”,
10” & 12”
0.039 - 0.20 inch
[1 – 5 mm]
63 - 77 oz-in
[0.45 - 0.55 Nm]
Metal
10” Wide,
15”
0.039 - 0.20 inch
[1 – 5 mm]
92 - 106 oz-in
[0.65 - 0.75 Nm]
Metal