AutomationDirect C-more EA9-T10CL, Hardware User Manual

Page: 61 / 140

Chapter 2 - Specifications
2-28
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Communications Ports (cont’d)
USB Type B Port
Program C-more via the USB programming port. It’s fast and easy, with no baud rate settings,
parity, or stop bits to worry about. We stock standard USB cables for your convenience,
such as part no. USB-CBL-AB15. The USB type B port can be used to upload or download
projects to and from a PC (personnel computer).
USB Type A Port
The USB type A port is a standard feature for all models and can be used to connect various
USB 2.0 HID (Human Input Device) devices to the panel, such as:
• USB pen drives, (ADC p/n USB-FLASH)
• USB keyboards
• USB barcode scanners
• USB card scanners
C-more can log data to the USB pen drive as well as restore projects to the panel from the pen
drive. You can also back up project files and panel firmware.
NOTE: Output current is less than 200mA @ 5VDC.
Sound Interface (Audio Line Out)
When attached to an amplifier and speaker(s), C-more can play warning sounds, or
pre-recorded messages such as: “conveyor is jammed”. Various “Objects” in the C-more
programming software support sounds. C-more supports WAV type files. Sound files are
stored in the sound library.
Audio WAV File Specifications
The
C-more
Audio Line Out port supports the following WAV file specifications:
Audio Format (codec): PCM
Audio Sample Rate: 44.1 kHz
Channels: 2 (stereo)
Audio Sample Size: 16-bit