Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. C
3–6
Chapter 3: Specifications - CPU Modules
Ethernet I/O
The T1H-DM1E CPU’s built-in Ethernet port can be configured as an Ethernet I/O
master. The Ethernet I/O feature allows expansion beyond the local chassis to slave I/O
using the onboard high-speed Ethernet link.
The onboard Ethernet port can support up to 16 slave devices. The slave I/O modules
supported are:
• H2-EBC100
• T1H-EBC100 (Terminator I/O)
• GS-EDRV100 (GS Drives)
The Ethernet I/O network uses Category 5 UTP cables for cable runs up to 100 meters
(328 ft.) with extended distances achieved through Ethernet switches.
Terminator I/O
with T1H-EBC100
Module
GS-EDRV100
Direct
LOGIC
DL205 I/O with
H2-EBC100
Module
Stride
Ethernet
Switch
GS
Drive
C-more
Operator
Interface
Do-more T1H-DM1E CPU
USB
PGM
PORT
RUN
I/O
ERR
USB
TX
RX
TERM
RUN
STOP
T1H-DM1E
Ethernet I/O Example
