Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. C
4–4
Chapter 4: Specifications - Terminal Bases and Power Supplies
T1K-01AC, T1K-01DC Power Supply
Specifications
Specification
T1K-01AC
T1K-01DC
Input Voltage Range
110/220 VAC (85–264 VAC)
12/24 VDC (10.8–26.4 VDC)
Input Frequency
50/60 Hz (47–63 Hz)
-
Maximum Power
50VA
20W
Maximum Inrush Current
20A
10A
Insulation Resistance
>10M
q
@ 500VDC
Voltage Withstand (Dielectric)
1 min. @ 1500VAC between primary, secondary and field ground
Auxiliary 24VDC Supply
300mA maximum
-
Output 1:
5VDC
Base Power
Supplied
Voltage
5.25 VDC (5.00–5.50 VDC)
5.25 VDC (5.00– 5.50 VDC)
Current
a) 2.0 A maximum
b) 1.5 A maximum (see note)
2.0 A maximum
Ripple
5% maximum
5% maximum
Output 2:
24VDC
Base Power
Supplied
Voltage
24VDC (20.0–28.0 VDC)
-
Current
a) 300mA maximum
b) 500mA maximum (see note)
-
Ripple
10% maximum
-
Replacement Terminal Block -
Phoenix Contact
MVSTBW 2.5/4-ST-5.08 BK
MVSTBW 2.5/6-ST-5.08 BK
Fuse
1 (Primary) not replaceable
Environmental Specifications
Ambient Operating Temperature 32
!
F to 131
!
F (0
!
C to 55
!
C)
Storage Temperature
-4
!
F to 158
!
F (-20
!
C to 70
!
C)
Ambient Humidity
5% to 95% (Non-condensing)
Atmosphere
No corrosive gases. The level of
environmental pollution = 2 (UL 840).
Vibration Resistance
MIL STD 810C. Method 514.2
Shock Resistance
MIL STD 810C. Method 514.2
Voltage Withstand
1500VAC, 1 minute
Insulation Resistance
500VDC, 10M
q
Noise Immunity
NEMA ICS3-304
Impulse Noise 1
e
s, 1000V
FCC class A
RFI (144MHz, 430MHz 10W, 10cm)
NOTE:
500mA @ 24VDC is achieved by lowering the 5VDC to 1.5 A from 2.0 A.
