Do-more T1H Series PLC User Manual, 1st Edition, Rev. C
6–19
Chapter 6: Specifications - Analog I/O Modules
T1F-16DA-1 - 16 Channel Analog Current Output
*Max. allowable output power dissipation. For example, at 60
°
C and 24VDC, there
must be a load of at least 250
Ω
on the output circuit. Smaller loads will damage the
analog output circuit.
Specifications
Number of Channels
16
Output Ranges
0–20mA, 4–20mA
Output Type
Single ended, 1 common
Resolution
12 bit (1 in 4096)
Module Addressing
8 output bits (Y-control byte);
16 output words (WY)
Max. Loop Supply
30VDC
Peak Output Voltage
30VDC
Max. Load (ohm) / Power Supply
620
Ω
/ 18V, 910
Ω
/ 24V,
1200
Ω
/ 30V
Min. Load (ohm) / Power Supply*
0
Ω
/ 24V, 350
Ω
/ 30V @ 40
!
C
250
Ω
/ 24V, 600
Ω
/ 30V @ 60
!
C
Linearity Error (end to end)
±2 counts max.
±0.05% of full scale max.
Conversion Settling Time
400
e
s max. full scale change
Full Scale Calibration Error
±12 counts max.
Offset Calibration Error
0–20mA: ±5 counts max.
4–20mA: ±6 counts max.
Accuracy vs. Temperature
±50ppm /
!
C, full scale calibration
change
Max. Full Scale Inaccuracy
(% of full scale) all errors included
0.2% @ 25
!
C
0.4% @ 60
!
C
CPU Update Rate
1 channel per scan
Base Power Required
75mA @ 5VDC
External Module Power Supply Req.
21.6–26.4 VDC, 150mA, class 2
Operating Temperature
0 to 60
!
C (32 to 140
!
F)
Storage Temperature
-20 to 70
!
C (-4
to 158
!
F)
Relative Humidity
5 to 95% (non-condensing)
Environmental Air
No corrosive gases permitted
Vibration
MIL STD 810C 514.2
Shock
MIL STD 810C 516.2
Noise Immunity
NEMA ICS3-304
Weight
172g
T1F-16DA-1
0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
mm (in.)
Commons (not isolated)
8 9 10 111213 1415
0 1 2 3 4 5 6 7
) 5
1 .
3 (
0 8
) 4
1 .
2
( 3 .
4 5
) 1
0 .
1 (
7 .
5 2
9.2 (0.36)
8.1 (0.32)
8.1 (0.32)
89 (3.5)
COM 0
COM 1
COM 2 COM 3
V 0
V 1
V 2
V 3
83.3 (3.28)
Side View
Equivalent Output Circuit
NOTES:
1. Shields should be connected to the 0 V terminal of the module or the 0 V of
the power supply.
2. Unused current outputs should remain open (no connections) for minimum
power consumption.
Load
250 ohms
typical
0 – 20mA
20mA
0mA
4095
0
4 – 20mA
20mA
4mA
4095
0
Output Signal Ranges
Note:
V 0 and
V 1 internally
connected
Note:
V 2 and V 3
internally connected
to Commons
T1F-16DA-1
Loop Supply
18-30 VDC
Module Supply
24 VDC
Equivalent Output Circuit
Equivalent Output Circuit
0 – 20mA
20mA
0mA
4095
0
4 – 20mA
20mA
4mA
4095
0
Output Signal Ranges
Output Range/Resolution
