Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. C
1–31
Chapter 1: Getting Started
The next step is to enable edits within the Data View window. To do so, click the yellow box
with the “E” found in the top left corner of the Data View window, as seen above. The Edits
column is now added to the Data View window.
The Edits column allows you to make changes to the current values of the elements listed.
T1_Start’s current value is OFF. Click the ON button under the Edits column and the
Write Current Edit and the Writes All Edits buttons will appear at the top of the window.
These buttons will write individual or all edits made in the Data View window to the PLC.
Click the Write Current Edit to PLC button and confirm it. This will write the new value
to T1_Start. Once T1_Start changes to an ON state, the timer (T1) will begin to time and
quickly reach the preset. As soon as the preset is reached, the done bit, T1.Done, will turn
ON causing output Y1 to also turn ON as seen on the following page. Now write an OFF to
T1_Start and watch as the timer and Y1 reset.
