Maintenance
The Service LED will indicate the requirement for a
service and/or adjustment. To reset the Service LED
when the door is serviced, reprogram the Door Travel
Limits and the Door Travel Force – on completion of
this programming the Service LED will go out.
Whilst your operator does not require any periodic
maintenance, the door that it is fitted to does. Your
garage door is a large, heavy, moving object and should
be tested regularly to ensure it is in good condition. A
poorly maintained door could cause fatal or serious
injuries.
To ensure long and trouble free life of your operator
the following is recommended:
Monthly
• Disengage the operator and manually operate
the door: The door must be smooth to operate
by hand, an operating force on the bottom rail
should not exceed 150N (15kg (33lb)) force.
• Each month check that the operator reverses
when the door contacts a 1-1/2” high object
placed on the floor. Refer to Testing the Safety
System (see
Pages 18-19
).
NoTE:
If the door does not operate smoothly or the
safety reverse test failed,
CoNTACT A TRAINED
DooR SySTEM TEChNICIAN.
yearly
We suggest that you contact your nearest Authorised Dealer
to perform an annual door service.
Warranty Expired Indicator
When the opener reaches the number of cycles covered
by warranty the courtesy light will flash 10 times after each
operation to indicate that the warranty has expired. This
flashing will continue for twenty (20) operations unless the
user acknowledges the warranty expiry indicator and stops
the light from flashing. To stop the courtesy light flashing
press the LIMIT SET button while the light is flashing after
an operation.
WARNING!
Failure to maintain your garage
door may void the warranty on your garage
door operator.
Date
Service by
Signature
Invoice No.
Amount
Service Record
Record any maintenance in the following table to assist in any warranty service.
CAuTIoN:
Frequently
examine
the
installation, in particular cables, springs
and mountings, for signs of wear, damage or
imbalance. Do not use if repair or adjustment
is needed since a fault in the installation
or an incorrectly balanced door may cause
injury.
Adjustments should only be carried out by
experienced persons, as this function can
be dangerous if not performed under strict
safety procedures.
Diamond PD
Power Drive
: Instruction Manual
© Copyright 2011
29
PA1000
Instruction Manual (Instructions d’installation)
