Setting Speed and Limits
Step 16 - Setting Speed Mode
The default speed of the operator has been set to suit the
majority of applications. However, there are 3 speed modes
available if required:
SLOW - suits one piece door without tracks.
1.
MEDIUM (default) - suits majority of applications.
2.
FAST - suits some special applications.
3.
The speed settings can only be changed before setting the
travel limits. If the operator speed needs to be changed,
please complete the following steps below. If medium
(default) mode is appropriate skip straight to
Step 17.1
(Setting Travel Limits). Pressing the OPERATE button will
cycle through all three speed modes. To change the speed
setting, use the following steps:
Engage the C-Rail’s trolley (attached to the door via the
a.
arms) with the chain index by moving the door.
If the trolley does not “click” firmly onto the chain
b.
index, ensure that the manual release cord is not in the
disengaged position by pulling it backwards.
Turn on the power to the operator. The
c.
Close Limit
LED
will be flashing.
Remove the buttons cover with a blade screwdriver
d.
(fig. 20)
.
Press the
e.
oPERATE
button once, twice or three time
to select
SLoW
,
MEDIuM
or
fAST
speed mode.
fig.20
Door opener
Speed Mode
open LED
(green)
status
open LED
(red)
status
Beeper
Medium (Default)
ON
ON
ON
Fast
ON
OFF
ON
Slow
OFF
ON
OFF
Diamond PD
Power Drive
: Instruction Manual
© Copyright 2011
17
PA1000
Instruction Manual (Instructions d’installation)
